Beckhoff AX8000 System Manual page 45

X01 – input terminal AX8620
Commissioning
Commissioning of the AX8000 is only possible if the terminal points "R
bridged (delivery state) or an external brake resistor is connected to the terminal points "R
Note
+" and "R
B
Input terminal Terminal
point
PE
L3 / N
L2
L1
X01 – input terminal AX8640
Input terminal
AX8000 - system manual
All manuals and user guides at all-guides.com
-". Without this measure the AX8000 is stopped with an error message.
Connection
Protective conductor
Phase L3 / N (for 1-
phase power supply)
Phase L2
Phase L1
Terminal Connection
point
L3 / N Phase L3
L2 Phase L2
L1 Phase L1
PE Protective
conductor
Version: 1.0
Electrical installation
+" and "R
bin´
Max. wire cross- Tightening torque
section
2
6 mm (AWG 8) 0.5 – 0.6 Nm
(4.4 – 5.3 lbf in)
Max. wire cross- Tightening torque
section
2
16 mm (AWG 6) 1.2 – 1.5 Nm
(10.6 – 13.3 lbf in)
-" are
B
B
45