Documentation Issue Status; Scope Of The Documentation; Appropriate Use - Beckhoff AX8000 System Manual

Foreword
2.2

Documentation issue status

Version
1.0
0.0.1
2.2.1

Scope of the documentation

The overall documentation package for the AX8000 multi-axis servo system is comprised of the following
manuals:
AX8000 -
System manual (this document)
Startup
Commissioning under TwinCAT3
CoE - object description
Diagnostic messages
AX2090-BW8x brake resistors
2.3

Appropriate use

The AX8000 multi-axis servo system is exclusively designed for the operation of suitable synchronous
motors with torque, speed and position control. The max. permissible effective voltage of the motors must be
higher than or at least equal to the effective mains voltage supplied to the servo system.
The supply, axis and capacitor modules of the AX8000 multi-axis servo system are installed exclusively as
components in electrical systems or machines. They may only be put into operation as integrated
components of the system.
Caution - Risk of injury!
Basically, electronic devices are not fail-safe. The machine manufacturer is responsible for
ensuring that the connected motors and the machine are brought into a safe state in the
WARNING
event of a fault in the drive system.
The components and modules listed above may only be operated in a closed control cabinet, taking into
consideration the environmental and operating conditions [} 29] described in the section: "Technical Data".
Improper use
The AX8000 multi-axis servo system is not suitable for use in the following areas:
• in ATEX zones without a suitable housing
• in areas with aggressive environments (e.g. aggressive gases or chemicals)
8
All manuals and user guides at all-guides.com
Comment
First publication
Internal version
Definition
Description of the mechanical and electrical
parameters as well as all information necessary for
the use of the AX8000 multi-axis servo system.
User manual for the installation and assembly of the
AX8000 multi-axis servo system.
Commissioning tutorial under TwinCAT3 including
user information on the TC DriveManager 2 and a
description of the safety function STO (Safe Torque
Off) over FSoE (Safety over EtherCAT).
Documentation of CAN over EtherCAT – objects with
attribute tables.
Documentation of the error messages of the AX8000
multi-axis servo system with attribute tables and
problem/solution descriptions.
Operating instructions for the use and installation of
the AX2090-BW8x brake resistors as accessories for
the AX8000 multi-axis servo system.
Version: 1.0 AX8000 - system manual