Ignoring Mtu Check For Dd Packets; Disabling Interfaces From Receiving And Sending Ospfv3 Packets - HP 6125XLG Configuration Manual

Step
3. Configure a router priority.

Ignoring MTU check for DD packets

When LSAs are few in DD packets, it is unnecessary to check the MTU in DD packets to improve
efficiency.
To ignore MTU check for DD packets:
Step
1. Enter system view.
2. Enter interface view.
3. Ignore MTU check for DD
packets.
Disabling interfaces from receiving and sending OSPFv3
packets
After an OSPFv3 interface is set to silent, direct routes of the interface can still be advertised in
Intra-Area-Prefix-LSAs through other interfaces, but other OSPFv3 packets cannot be advertised. No
neighboring relationship can be established on the interface. This feature can enhance the adaptability
of OSPFv3 networking.
To disable interfaces from receiving and sending OSPFv3 packets:
Step
1. Enter system view.
2. Enter OSPFv3 view.
3. Disable interfaces from
receiving and sending
OSPFv3 packets.
Command
ospfv3 dr-priority priority [ instance
instance-id ]
Command
system-view
interface interface-type
interface-number
ospfv3 mtu-ignore [ instance
instance-id ]
Command
system-view
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
silent-interface { interface-type
interface-number | all }
310
Remarks
The default router priority
is 1.
Remarks
N/A
N/A
By default, OSPFv3 does not
ignore MTU check for DD packets.
Remarks
N/A
N/A
By default, the interfaces are able
to receive and send OSPFv3
packets.
This command disables only the
interfaces associated with the
current process, though multiple
OSPFv3 processes can disable the
same interface from receiving and
sending OSPFv3 packets.