Hotkey; Quit - HP A7500 Series Command Reference Manual

ESC_> Specify the end of clipboard.

hotkey

Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
View
System view
Default level
2: System level
Parameters
CTRL_G: Associates hot key Ctrl+G to the specified command.
CTRL_L: Associates hot key Ctrl+L to the specified command.
CTRL_O: Associates hot key Ctrl+O to the specified command.
CTRL_T: Associates hot key Ctrl+T to the specified command.
CTRL_U: Associates hot key Ctrl+U to the specified command.
command: The command line associated with the hot key.
Description
Use the hotkey command to associate a hot key to a command.
Use the undo hotkey command to restore the default.
By default, Ctrl+G, Ctrl+L and Ctrl+O have these corresponding commands:
• Ctrl+G corresponds to display current-configuration.
Ctrl+L corresponds to display ip routing-table.
•
Ctrl+O corresponds to undo debugging all.
•
You can modify the associations as needed.
Examples
# Associate the hot key Ctrl+T to the display tcp status command.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status

quit

Syntax
quit
View
Any view
Default level
0: Visit level (in user view)
7