Table of Contents
Advertisement
Chapter 7: Configuring the Debugger
Modifying Display Area Windows
To erase standard I/O and user-defined window
contents
• Using the command line, enter:
Window Erase <user_window_nmbr>
Enter the user window number (the standard I/O window number is 20) whose
contents you wish to clear, and press the < Return> key.
If you do not specify a window number or if you specify 0, the active
user-defined window is cleared. This command is useful in macros.
Examples
To erase the contents of user window 57:
Window Erase 57
To remove user-defined screens and windows
• Using the command line, enter:
Window Delete <user_window_nmbr>
Enter the number of the window to be removed, and press the < Return> key.
To remove a user-defined screen, remove all windows associated with that
screen.
You cannot remove predefined debugger windows and screens.
Examples
To remove a user-defined screen that has three windows (numbers 50, 55, and
73):
Window Delete 50
230
Advertisement
Table of Contents
