Cabinet Safety Precautions; Mounting Kit Contents - HP Integrity cx2600 Installation Instructions Manual

1
HP Server Mount Kit for 19 in. 2-Post Rack
Installation Instructions
Introduction
This manual provides instructions for installation of the hp Integrity cx2600 server chassis in a 19 in.
2-column rack, with column widths of 3 to 9 inches.

Cabinet Safety Precautions

WARNING Ensure that the rack is level and stable before working on the rack. Be sure the
leveling jacks (feet) extend to the floor and that the full weight of the rack rests
firmly on the floor.
Ensure that the rack has anti-tip measures in place. Such measures may include
WARNING
floor-bolting, anti-tip feet, ballast, or a combination of these measures as specified by
the rack manufacturer and applicable codes.
WARNING Be sure that adequate personnel are on hand to support the product(s) during the
installation process. Use of the appropriate lifting device is recommended as an
installation aid.
WARNING Always load the rack from the bottom up. Load the heaviest items in the rack first.
This makes the rack bottom-heavy and helps prevent the rack from becoming
unstable.
Do not overload the branch circuit that provides power to the rack. The total rack
WARNING
load should not exceed 80% of the branch circuit rating.

Mounting Kit Contents

This manual provides installation instructions for server mount kit AB292A. This kit is intended for use with
the hp Integrity cx2600 server, and includes the following:
• Chassis Tray (Base)
• Two Rack Brackets
• Cable Management Strain Relief Bar
• Mounting Hardware (screws, washers, and nuts)
Chapter 1
3