Table of Contents
Advertisement
Chapter 2: Entering Debugger Commands
Command Line Control Character Functions
Press the control key <Ctrl> simultaneously with the B, C, E, F, G, L, Q, R, S,
U, or \ keys to execute the operations listed in the following table. (The letter
keys may be upper- or lower-case.)
Command Line Control Character Functions
Control
Function
Recall command reverse.
<Ctrl> B
Abort the current command and return to debugger command mode.
<Ctrl> C
Clear to end of command line.
<Ctrl> E
Shift contents of active window to right.
<Ctrl> F
Shift contents of active window to left.
<Ctrl> G
Redraw screen.
<Ctrl> L
Resume output to screen (standard interface only).
<Ctrl> Q
Recall previous command.
<Ctrl> R
Suspend output to screen (standard interface only).
<Ctrl> S
Clear command line
<Ctrl> U
End the debug session (same as Debugger Quit Yes command)
<Ctrl> \
The Journal Window
The debugger displays debugger commands entered from the keyboard in the
Journal window. The Journal window also displays warning and informational
messages from the debugger and output generated by commands. This
window is available in both the high-level and assembly-level screens.
40
Advertisement
Table of Contents
