Mapping Memory; To Prevent Access To Memory Locations; To Prevent Writing To Memory Locations - HP 68000 Series User Manual

Mapping Memory

This section shows you how to:
•
•
•
•

To prevent access to memory locations

• Using the command line, enter:
Memory Map Guarded
Enter the range of addresses that should not be accessed, and press the
< Return> key.
Examples
To configure memory address range 8000h through 0a000h as guarded
(nonaccessible) memory:
Memory Map Guarded 8000h..0a000h

To prevent writing to memory locations

• Using the command line, enter:
Memory Map Read_Only
Prevent access to memory locations.
Prevent writing to memory locations.
Allow access to memory locations.
Display current memory map assignments.
Chapter 3: Loading and Executing Programs
Mapping Memory
105