Invalid characters follow command.
A command was entered with incorrect characters or with more characters
than were expected. Check the command name and re-enter the command.
This command is not implemented yet.
The command specified is currently not supported, but will be implemented in
a later release.
An attempt was made to specify a switch that does not exist. Check the
command syntax for the switches supported.
A command was entered without an argument that is required to execute the
command. Check the syntax description for the command and enter the
command again with the correct argument specification.
The argument specified is not valid for this command. Check command syntax
and re-enter the command with a valid argument.
Unexpected separator encountered.
The argument separator is not valid in this context. Check the syntax and enter
the correct separator.
Unknown expression character.
The specified expression character is not recognized by the debugger. Check
the syntax and enter the correct expression character.
Missing ' ) ', ' ] ', or ' } ' in expression.
The matching right parentheses, right bracket, or right curly brace in the
specified expression is missing. Check the expression and add the appropriate
Chapter 12: Debugger Error Messages