Chapter 3: Loading and Executing Programs
Using Breakpoints
Breakpoint Instr classname::
To clear selected breakpoints
• Position the mouse pointer in the Code window over the line at which you
wish to clear a breakpoint. Click the right mouse button.
Or:
• Position the mouse pointer in the Code window over the line at which you
wish to clear a breakpoint. Hold the right mouse button and select Set/Clear
Breakpoint.
Or:
• Position the mouse pointer in the Breakpoint window over the breakpoint you
wish to clear. Hold the right mouse button and select Delete Breakpoint.
Or:
• Place the breakpoint address in the entry buffer, then select
Breakpoints→Delete ().
Or:
• Using the command line, enter:
Breakpt Delete <brkpt_nmbr>
Enter the breakpoint number, and press the < Return> key.
The debugger assigns a breakpoint number to each breakpoint. The debugger
uses this number to remove the breakpoint.
The < brkpt_nmbr> is the number of the breakpoint displayed in the
debugger breakpoint window. Enter a range of breakpoint numbers
94