Table of Contents
Advertisement
Memory Map Write_Read
The Memory Map Write_Read command enables read/write access to a
specified memory location or a range of memory locations by the target
program. Memory Map Write_Read allows the program to read from or write
to specified code or data areas. The Memory Map Write_Read command
overrides any Memory Map Guarded and Memory Map Read_Only
commands previously executed.
The size of the address range specified in a Memory Map Guarded command
and the size of the address space that is mapped by combining all Memory
Map commands is limited only by the amount of virtual memory available to
the debugger. You can map a maximum of 60 banks of memory.
See Also
Memory Map Guarded
Memory Map Read_Only
Memory Map Show
Example
To configure memory address range 2000h through 3fffh as Write_Read
(RAM) memory:
Memory Map Write_Read 2000h..3fffh
Chapter 9: Debugger Commands
Memory Map Write_Read
357
Advertisement
Table of Contents
