Table of Contents
Advertisement
To install the software on a Sun SPARCsystem™ ™
Required Hardware and Software
To install and use the debugger/simulator's graphical interface, you need:
•
Sun SPARCsystem computer running Solaris version 2.3 or SunOS
version 4.1 or 4.1.1 or greater. The tape uses the QIC-24 data format.
To check the SunOS operating system version, enter the uname -a
command at the UNIX prompt. If the version number of the SunOS
operating system is less than 4.1, you must update the operating system to
version 4.1 or higher before you can use the debugger. For instructions on
updating your system, see the Sun Installing SunOS manual.
•
System V software. To find out whether the System V environment is
already installed on your system, check that the directory /usr/5bin exists.
For instructions on installing System V, see the Sun Installing SunOS
manual.
•
System V IPC facilities (semaphores). To find out whether the IPC
facilities are installed on your system, type ipcs. For instructions on
installing the IPC facilities, see the Sun System and Network
Administration manual.
•
At least 16 megabytes of memory (for the graphical user interface).
•
Color display (optional, but recommended for the graphical user
interface).
•
Approximately 16 Mbytes of disk space.
•
HP B1466 debugger/simulator software.
To install the software on a Sun SPARCsystem™
Chapter 14: Installation
517
Advertisement
Table of Contents
