Table of Contents
Advertisement
list. Finally, you cannot predefine entries for the recall list — the list only
contains the most recent commands executed during the debugger session.
To display the help window
• Press the function key F5.
Or:
• Enter the command
Debugger ?
This command displays a menu of debugger commands, command parameters,
function keys, and other debugger features. Descriptions for each topic may be
obtained by positioning the cursor on the first letter of any topic in the help
menu and pressing the < Return> key.
The debugger's help window is context sensitive. When you display the help
window, the cursor is located on the last command you entered before
displaying the help window. The debugger assumes you need help with this
command. Press < Return> to display information about the command.
Pressing < Return> or < Down> displays information on the next item in the
help menu. Pressing < Up> displays information about the previous item in
the help menu.
You can move the cursor to the first command of a command type (Breakpt,
Debugger, etc.) by entering the first letter of the command type. For example,
to move the cursor to the entry for the first window command, enter:
W
The cursor will be positioned at the Window Active command entry. Then you
can use the cursor keys to select the window command you need help with and
press < Return> to display information on that command.
Chapter 2: Entering Debugger Commands
Using the Command Line with the Keyboard
65
Advertisement
Table of Contents
