Table of Contents
Advertisement
Caution
When making a new window on the high-level or assembly-level screens, be
careful not to enter coordinates that will result in a window that covers the
status line and command line. On a standard 80-column terminal display, a
row coordinate may be between 0 and 23. Creating a window with a bottom
row coordinate greater than 18 will cause part or all of the status and
command lines to be covered.
Examples
To make a user window numbered 57 in user screen 4 with the upper-left
corner of the window at coordinates 5,5 and the lower-right corner of the
window at coordinates 18,78:
Window New 57 <tab> User_Screen 4 <tab> Bounds 5,5,18,78
If user screen 4 does not exists, the debugger automatically creates it.
To display user-defined screens
• Using the command line, enter:
Window Screen_On User_Screen <screen_nmbr>
Enter the user screen number, and press the < Return> key.
Examples
To display user screen 4:
Window Screen_On User_Screen 4
Chapter 7: Configuring the Debugger
Modifying Display Area Windows
229
Advertisement
Table of Contents
