Chapter 3: Loading and Executing Programs
Mapping Memory
Enter the range of addresses that should not be written to, and press the
< Return> key.
Examples
To configure memory address range 8000h through 8fffh as read-only (ROM)
memory:
Memory Map Read_Only 8000h..8fffh
To allow access to memory locations
• Using the command line, enter:
Memory Map Write_Read
Enter the range of addresses to which reads and writes are allowed, and press
the < Return> key.
Examples
To configure memory address range 2000h through 3fffh as Write_Read
(RAM) memory:
Memory Map Write_Read 2000h..3fffh
To display current memory map assignments
• Using the command line, enter:
Memory Map Show
And press the < Return> key.
Examples
To display the memory map:
106