Table of Contents
Advertisement
To turn the command line on or off
• To turn the command line on or off using the pull-down menu, choose
Settings→Command Line.
• To turn the command line on or off using the status line pop-up menu:
position the mouse pointer within the status line area, press and hold the right
mouse button, and choose Command Line On/Off from the menu.
• To turn the command line on or off with a single mouse click, hold the
< Shift> key and click on the status line.
• To turn the command line off using the command line entry area pop-up
menu: position the mouse pointer within the entry area, press and hold the
right mouse button, and choose Command Line On/Off from the menu.
• To turn the command line on with the keyboard: place the mouse pointer in
the display area and press any alphanumeric key.
"On" means that the command line is displayed and you can use the command
token pushbuttons, the command return and recall pushbuttons, and the
cursor pushbuttons for command line editing. "Off" means the command line
is not displayed and you can use only the pull-down and pop-up menus and the
action keys to control the interface.
The command line area begins just below the status line and continues to the
bottom of the debugger window. The status line is not part of the command
line and continues to be displayed whether the command line is on or off.
Choosing certain pull-down menu items while the command line is off causes
the command line to be turned on. That is because the menu item chosen
requires some input at the command line that cannot be supplied another way.
Chapter 2: Entering Debugger Commands
Using the Command Line with the Mouse
57
Advertisement
Table of Contents
