Parts Identification - Mitsubishi Electric MR-J2M-P8B Instruction Manual

1. FUNCTIONS AND CONFIGURATION

1.7 Parts identification

(1) Drive unit
Status indicator LED
Indicates the status of the drive unit.
Blinking green: Servo off status
Steady green: Servo on status
Blinking red: Warning status
Steady red: Alarm status
CN2
Encoder connector
Connect the servo
motor encoder
(2) Interface unit
CN1A
Bus cable connector
For connection of servo system controller or
preceding-axis servo amplifier.
CN3
For connection of personal computer (RS-232C).
Outputs analog monitor.
CNP2
Servo motor connector
For connection of servo
motor power line cable
Display
Indicates operating status or alarm.
Pushbutton switches
Used to change status indication or set IFU parameters.
Charge lamp
Lit when main circuit capacitor carries electrical charge.
When this lamp is on, do not remove/reinstall any unit
from/to base unit and do not unplug/plug cable and
connector from/into any unit.
1 - 7
www.dadehpardazan.ir 88594014-15
Mounting screw
Rating plate
Mounting screw
Display/setting cover
CN1B
Bus cable connector
For connection of subsequent-axis servo
amplifier or MR-A-TM termination connector.