ABB i-bus KNX Product Manual page 98


ABB i-bus KNX
Commissioning
Reaction on DALI voltage or
light controller supply voltage recovery
Options:
This parameter determines the state that the Staircase lighting function assumes after DALI or light
controller supply voltage recovery.
After a DALI or light controller operating voltage recovery, the lighting group first assumes the state as
parameterized in the
for the Staircase lighting function:

Not activated: The Staircase lighting function is not reactivated after DALI or light controller operating
voltage recovery. The lighting group behaves like a normal lighting group without additional functions.

Activate standby: The Staircase lighting function is activated after DALI or light controller operating
voltage recovery and is in standby. The lighting group can be started by an ON telegram or a renewed
activation via the communication object Activate stairc. light./Status.
96 2CDC 507 100 D0202 | DLR/S 8.16.1M
Relative dimming
Options: No reaction
Function switches to standby
If the Staircase lighting function is activated, the parameter can be used to define the reaction to
dimming telegram to the communication object Relative dimming.

No reaction: Dimming telegrams are ignored.

Function switches to standby: A dimming telegram ends the Staircase lighting function, and the
lighting group executes the dimming telegram. The Staircase lighting function is latent and
waits until a renewed activation via the communication object Activate stairc. light./Status or via
an ON telegram to the communication object Switch.
Recall scene
Options: No reaction
Function switches to standby
When the activated Staircase lighting function is activated, the parameter can be used to define the
reaction to a scene recall on the communication object Recall scene.

No reaction: A scene recall is ignored.

Function switches to standby: A scene recall ends the Staircase lighting function, and the
DLR/S executes the dimming telegram. The Staircase lighting function is latent and waits until
a renewed activation via the communication object Activate stairc. light./Status or via an ON
telegram to the communication object Switch.
Not activated
Activate standby
Activate and ON
Previous state to malfunction
Parameter window - Gx Fault, page 81. The following states can be parameterized