ABB i-bus KNX Product Manual page 12


ABB i-bus KNX
General
The following diagram clarifies the function of the group-oriented DALI Light Controller DLR/S 8.16.1M:
Note
There is always the possibility of integrating a lamp (DALI device) in several lighting groups. In this
case, we refer to several overlapping lighting groups. The DLR/S does not forcibly inhibit this option.
However, these overlapping lighting groups are not specially supported. There are also no special
parameterization options. The reaction of the overlapping lighting groups is not defined.
It is not recommended, especially with constant light control, to use overlapping lighting groups. The
control circuits should not mutually influence one another or be influenced by an unknown external
controller. In these cases, unsteady, incorrect or highly fluctuating constant light control can result.
10 2CDC 507 100 D0202 | DLR/S 8.16.1M