ABB i-bus KNX Product Manual page 9


ABB i-bus KNX
General
The application offers a wide range of functions:

Switching, dimming, setting of brightness values including status feedbacks

Programming of individual maximum and minimum dimming limit values (dimming thresholds)

Status response of lamps and/or ballast malfunctions

Coded error checks for each of the individual 64 DALI devices

Different dimming speeds for switching, setting brightness and dimming

Reaction on DALI and KNX bus voltage failure and recovery

Programming of the brightness value (power on level) after a ballast supply voltage recovery

Individual burn-in of lighting groups

Block function and Forced operation

Internal master/slave control in the DLR/S or via communication object

For every Light Controller, a brightness offset that can be activated for a second light strip via KNX

14 independent light scenes, which can be recalled or stored via 1 bit or 8 bit telegrams

Staircase lighting function including warning
DLR/S 8.16.1M | 2CDC 507 100 D0202 7