ABB i-bus KNX Product Manual page 42


ABB i-bus KNX
Commissioning
Copy
The following options can be selected before copying the parameter settings:

Keep group addresses in the destination channel unchanged (if possible)

Copy group addresses

Delete group addresses in the destination channel
Exchange
The following options can be selected before exchanging the parameter settings:

Exchange without group addresses

Exchange with group addresses

Delete group addresses
40 2CDC 507 100 D0202 | DLR/S 8.16.1M
With this button, you copy the settings from the source channel to the destination
channel/channels.
With this button, you exchange the settings of the source channel with those of the
destination channel.
Confirm your selection with this button, and the window closes.
Using this button, the window closes without accepting the changes.