ABB i-bus KNX Product Manual page 81


ABB i-bus KNX
Commissioning
With the option Yes: via object "Brightness value/Status", the following parameter appears:
Status response of lamp/ballast fault
Options:
This parameter defines how the current status of a lamp/ballast fault is sent.

Yes: A status message is sent. The send reaction can be parameterized with the following Send
parameter

No: No status message is sent and no communication object is displayed.
With the option Yes, the following parameters appear:
Send
Options: After a change
On request
After a change or request

After a change: The status is sent via the communication object after a change.

On request: The status is sent after a request by the communication object Request status
values.

After a change or request: The status is sent via the KNX when the status changes or the
status is requested via the communication object Request status values.
Yes
No
Send
Options: After a change
On request
After a change or request

After a change: The status is sent via the communication object after a change.

On request: The status is sent after a request by the communication object Request status
values.

After a change or request: The status is sent via the KNX when the status changes or the
status is requested via the communication object Request status values.
DLR/S 8.16.1M | 2CDC 507 100 D0202 79