ABB i-bus KNX Product Manual page 78


ABB i-bus KNX
Commissioning
76 2CDC 507 100 D0202 | DLR/S 8.16.1M
Status of burn-in
Options: No
Yes: via object "Burn-in lamp/Status"
The DLR/S features the option of sending the status of the Burn-in function on the KNX via
communication object Burn-in lamp/Status.

No: No status message is sent for the Burn-in function.

Yes: The communication object Burn-in lamps changes to Burn-in lamps/Status. If this
communication object receives an ON telegram, the Burn-in function is started and the status
is sent on the KNX. The following parameter appears:
Send
Options: After a change
On request
After a change or request

After a change: The status is sent via the communication object after a change.

On request: The status is sent after a request by the communication object Request
status values.

After a change or request: The status is sent via the KNX when the status changes or
the status is requested via the communication object Request status values.