ABB i-bus KNX Product Manual page 100


ABB i-bus KNX
Commissioning
Status response of fct. Stairc. light.
Options:

No: The status of the Staircase lighting function is not transferred to the KNX.

Yes: via obj. "Activate stairc.light./Status": The communication object Activate Stairc.light./Status does
not just activate or deactivate the Staircase lighting function. This communication object also uses the
status to display whether the Staircase lighting function is active or inactive. The following parameter
appears:
98 2CDC 507 100 D0202 | DLR/S 8.16.1M
No
Yes: via obj. "Activate stairc.light./Status"
Send,
additional object, see note above
Options: After a change
On request
After a change or request

After a change: The status is sent via the communication object after a change.

On request: The status is sent after a request by the communication object Request status
values.

After a change or request: The status is sent via the KNX when the status changes or the
status is requested via the communication object Request status values.