Xcommand Httpfeedback Deregister; Xcommand Httpfeedback Register - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand FarEndControl Source Select
Select which video input source to use as the main source on the far end system.
CallId: The CallID is returned when the xCommand Dial command is run. During the call you can run
the xStatus Call command to see the CallId.
SourceId: Select a video input source on the far end.
Requires user role: USER
Parameters:
CallId: <0..65534>
SourceId(r): <0..15>
Example:
xCommand FarEndControl Source Select CallId:3 SourceId:1
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
HttpFeedback commands

xCommand HttpFeedback Deregister

xCommand HttpFeedback Register

104
xCommand xCommand
Deregister XML feedback over HTTP(S).
Requires user role: USER
Parameters:
FeedbackSlot(r): <1..4>
Example:
xCommand HttpFeedback Deregister FeedbackSlot:1
Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
FeedbackSlot: You can have from 1 to 4 slots for feedback.
ServerUrl: Define the URL for the HTTP(S) server.
Expression[1..15]: What parts of the Status and Configuration XML documents to monitor are
specified by XPath expressions. You can have from 1 to 15 XPath expressions.
Requires user role: USER
Parameters:
FeedbackSlot: <1..4>
ServerUrl(r): <S: 1, 2048>
Expression[1..15]: <S: 1, 255>
Example:
xCommand HttpFeedback Register FeedbackSlot:1 ServerUrl:10.47.19.41
Expression[1]:Status/Video Expression[2]:Status/Audio Expression[3]:Status/
Call Expression[4]:Status/Conference
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.