Cisco TelePresence SX20 Codec Reference Manual page 89

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand Audio Volume Increase
Increase the volume on the endpoint.
Requires user role: USER
Parameters:
Steps: <1..10>
Example:
xCommand Audio Volume Increase Steps:3
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume Mute
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role: USER
Parameters:
Level(r): <1..100>
Example:
xCommand Audio Volume Set Level:30
xCommand Audio Volume SetToDefault
Set the current volume level as the default for the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume SetToDefault
xCommand Audio Volume UnMute
Unmute the volume on the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume SetToDefault
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xCommand Audio VUMeter Start
xCommand Audio VUMeter Stop
xCommand Audio VUMeter StopAll
89
xCommand xCommand
Start collecting VU meter information for connector given by type and ID.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..4>
Example:
xCommand Audio VUMeter Start ConnectorType: Microphone ConnectorId: 1
Stop collecting VU meter information for connector given by type and ID.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..4>
Example:
xCommand Audio VUMeter Stop ConnectorType: Microphone ConnectorId: 1
Stop collecting VU meter information for all connectors.
Requires user role: USER
Example:
xCommand Audio VUMeter StopAll
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.