Xstatus Conference Selectedcallprotocol - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus Conference SelectedCallProtocol

Indicates which call protocol is used as default.
Value space of the result returned:
<H323/SIP/H320>
Example:
xStatus Conference SelectedCallProtocol
*s Conference SelectedCallProtocol: SIP
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
Diagnostics status
xStatus Diagnostics
xStatus Diagnostics Call [n] Channels IncomingAudioChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels IncomingVideoChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels IncomingDataChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingAudioChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingVideoChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingDataChannel [n] Netstat 1 Jitter
150
xCommand
Shows the top level overview of the diagnostics. The example shows the status for an ongoing call.
The identities of the call and channels are used when querying additional information.
Shows the jitter at the present moment in the incoming/outgoing channel, as specified by RFC
3550.
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
Jitter
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 Jitter:
0
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.