Camera Status; Xstatus Camera; Xstatus Camera [N] Connected; Xstatus Camera [N] Hardwareid - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Call [n] DeviceType
Indicates whether the remote system is a single endpoint or an MCU. Some Cisco endpoints (EX90,
C40, C60, C90, SX20, SX80, MX200 G2, MX300 G2) have built-in MCU capabilities.
Value space of the result returned:
<Endpoint/MCU>
Example:
xStatus Call DeviceType
*s Call 4 DeviceType: Endpoint
** end
xStatus Call [n] AttendedTransferFrom
Shows the CallId for the call the current call was transferred from.
Value space of the result returned:
<Integer>
Example:
xStatus Call 1 AttendedTransferFrom
*s Call 1 AttendedTransferFrom: 1234
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

Camera status

xStatus Camera

xStatus Camera [n] Connected

xStatus Camera [n] HardwareID

xStatus Camera [n] Manufacturer

141
xCommand
Shows the top level overview of the camera status.
Shows if the camera is connected or not.
Value space of the result returned:
<True/False>
Example:
xStatus Camera 1 Connected
*s Camera 1 Connected: True
** end
Shows the hardware identity of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 HardwareID
*s Camera 1 HardwareID: "50000000"
** end
Shows the manufacturer of the camera.
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Manufacturer
*s Camera 1 Manufacturer: "TANDBERG"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.