Cisco TelePresence SX20 Codec Reference Manual page 155

Cisco TelePresence SX20 Codec
Contents Introduction
H320 status
xStatus H320
Shows the top level overview of the H320 status.
xStatus H320 Gateway Status
Returns the state of the H320 Gateway, if the codec is paired with an ISDN Link.
Value space of the result returned:
<OK/OKWithWarning/Error/Inactive/Warning>
Example:
xStatus H320 Gateway status
*s H320 Gateway Status: Error
** end
xStatus H320 Gateway Address
Returns the IPv4 address of the ISDN Gateway, if the endpoint is paired to one.
Value space of the result returned:
<OK/OKWithWarning/Error/Inactive>
Example:
xStatus H320 Gateway Status
*s H320 Gateway Status: Inactive
** end
xStatus H320 Gateway Number
Returns the IPv6 address of the ISDN Gateway if the endpoint is paired to one.
Value space of the result returned:
<String>
Example:
xStatus H320 Gateway Number
*s H320 Gateway Number: ""
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xStatus H320 Gateway Mode
xStatus H320 Gateway Reason
xStatus H320 Gateway Id
155
xCommand
Returns information on the type of calls the ISDN Gateway is configured for, if the codec is paired
with an ISDN Link.
Value space of the result returned:
<Unknown/PRI/BRI/External/G703>
Example:
xStatus H320 Gateway Mode
*s H320 Gateway Mode: Unknown
** end
Shows the reason for rejected Gateway registration. Only available if the codec is connected to an
ISDN Link.
Value space of the result returned:
<String>
Example:
xStatus H320 Gateway Reason
*s H320 Gateway Reason: ""
** end
Returns the unique identification of the H320 Gateway, if the codec is paired with an ISDN Link. .
Value space of the result returned:
<String>
Example:
xStatus H320 Gateway Id
*s H320 Gateway Id: "00:50:60:0B:EF:11"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.