Calllog Commands; Xcommand Calllog Clear; Xcommand Calllog Missed Delete; Xcommand Calllog Missed Dismiss - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

CallLog commands

xCommand CallLog Clear

Clear call logs stored in the system. If a logtag is given as argument, that specific call is deleted
from the logs. If no logtag is given the system deletes all call logs. The LogTag values for the calls
are found by issuing the xHistory CallLog Call command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Clear

xCommand CallLog Missed Delete

Delete the call log of missed calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes the complete missed calls log. The LogTag values
for missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Delete LogTag:119

xCommand CallLog Missed Dismiss

Review the call log of dismissed calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete missed calls log. The LogTag
values for missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Dimissed LogTag:119
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration

xCommand CallLog Outgoing Delete

xCommand CallLog Received Delete

xCommand CallLog Recent Delete

96
xCommand xCommand
Delete the call log of outgoing calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete outgoing calls log. The LogTag
values for outgoing calls are found by issuing the xHistory CallLog Outgoing command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Outgoing Delete LogTag:202
Delete the call log of received calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete received calls log. The LogTag
values for received calls are found by issuing the xHistory CallLog Received command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Received Delete LogTag:126
Delete the call log of recent calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes all call logs. The LogTag values for recent calls are
found by issuing the xHistory CallLog Recent command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Recent Delete LogTag: 786
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.