About Disconnect Cause Types - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

About disconnect cause types

The following parameters are logged when a call is
disconnected. The disconnect cause types are used in
disconnect events (xEvent) and also logged in xHistory
CallLogs.
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example 1:
xHistory CallLogs Call 694
...
*h xHistory CallLogs Call 694 DisconnectCause: "Normal"
*h xHistory CallLogs Call 694 DisconnectCauseType: RemoteDisconnect
*h xHistory CallLogs Call 694 DisconnectCauseCode: 16
*h xHistory CallLogs Call 694 DisconnectCauseOrigin: Q850
...
** end
217
xCommand xStatus
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
API Reference Guide
Appendices Appendices