Cisco TelePresence SX20 Codec Reference Manual page 188

Cisco TelePresence SX20 Codec
Contents Introduction
SIP status
xStatus SIP
Shows the top level overview of the SIP status.
xStatus SIP Proxy [1] Status
Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
AuthenticationFailed: Wrong user name or password.
Value space of the result returned:
<Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown/AuthenticationFailed>
Example:
xStatus SIP Proxy 1 Status
*s SIP Proxy 1 Status: Active
** end
xStatus SIP Proxy [1] Address
Shows the address of the SIP Proxy that the system communicates with.
Value space of the result returned:
<String>
Example:
xStatus SIP Proxy 1 Address
*s SIP Proxy 1 Address: "192.0.2.50"
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xStatus SIP Proxy [1] Secure
xStatus SIP Proxy [1] Verified
188
xCommand
Shows the encryption status of the signaling with the SIP Proxy server.
Value space of the result returned:
<True/False>
Example:
xStatus SIP Proxy 1 Secure
*s SIP Proxy 1 Secure: True
** end
Shows whether or not the SSL certificate of the server that the video system / codec tries to
register to is included in the codec's trusted CA-list. The server is typically a Cisco VCS or CUCM.
True: The server's SIP certificate is checked against the trusted CA-list on the codec and found
valid. Additionally, the fully qualified domain name of the server matches the valid certificate.
False: A TLS connection is not set up because the SIP certificate verification failed or the
domain name did not match. Note that the status also returns False when TLS is not used
(xConfiguration SIP Profile 1 DefaultTransport not set to TLS) or certificate verification is switched
off (xConfiguration SIP Profile TlsVerify set to Off).
Value space of the result returned:
<True/False>
Example:
xStatus SIP Proxy 1 Verified
*s SIP Proxy 1 Verified: False
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.