Cisco TelePresence SX20 Codec Reference Manual page 78

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Video OSD MenuStartupMode
Configure the state of the on-screen menus after a video system / codec boot.
Requires user role: ADMIN
Value space: <Closed/Home>
Closed: The on-screen menu will NOT expand automatically. This setting is recommended for 3rd
party integrations that need full control of what is shown on the OSD.
Home: The on-screen menu will show the home menu expanded.
Example: xConfiguration Video OSD MenuStartUpMode: Home
xConfiguration Video OSD VirtualKeyboard
Determine whether or not the virtual keyboard will automatically show on screen when text is to be
entered in an input field. The OSD (On Screen Display) is where you find the menus, dialogs, icons
and indicators, and the navigation is done with a remote control.
Requires user role: ADMIN
Value space: <UserSelectable/AlwaysOn>
UserSelectable: The user has to press a softbutton to open or close the virtual keyboard.
AlwaysOn: The virtual keyboard is automatically shown on screen as long as text can be entered in
an input field.
Example: xConfiguration Video OSD VirtualKeyboard: UserSelectable
xConfiguration Video OSD EncryptionIndicator
Define for how long the encryption indicator (a padlock) will be shown on screen. The setting
applies to both encrypted and non-encrypted calls, i.e. both to secure and non-secure
conferences. The icon for encrypted calls is a locked padlock, and the icon for non-encrypted calls
is a crossed out locked padlock.
Requires user role: ADMIN
Value space: <Auto/AlwaysOn/AlwaysOff>
Auto: If the Conference Encryption Mode setting is set to BestEffort and the call is encrypted, the
encryption indicator is shown during the first seconds of a call. If the Conference Encryption Mode
setting is set to BestEffort and the call is non-encrypted, the crossed out encryption indicator is
shown during the entire call. If the Conference Encryption Mode setting is NOT set to BestEffort,
the encryption indicator is not shown at all.
AlwaysOn: The encryption indicator is displayed on screen during the entire call. This applies to
both encrypted and non-encrypted calls for all Conference Encryption Mode settings.
AlwaysOff: The encryption indicator is never displayed on screen. This applies to both encrypted
and non-encrypted calls for all Conference Encryption Mode settings.
Example: xConfiguration Video OSD EncryptionIndicator: Auto
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration xConfiguration
xConfiguration Video OSD MissedCallsNotification
xConfiguration Video OSD AutoSelectPresentationSource
xConfiguration Video OSD CallSettingsSelection
78
xCommand
Define if there should be a missed calls notification on screen. The setting only applies when the
video system is operated by a remote control and the on-screen menu. When using the Touch
controller the notification dialog box will appear on the Touch controller, and not on the OSD.
Requires user role: ADMIN
Value space: <Off/On>
Off: The OSD will NOT show any indication that there have been any missed calls. This setting is
recommended for 3rd party integrations that need full control of what is shown on the OSD.
On: The OSD will show a notification of missed calls.
Example: xConfiguration Video OSD MissedCallsNotifications: On
Determine if the presentation source should be automatically selected.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable automatic selection of the presentation source.
On: Enable automatic selection of the presentation source.
Example: xConfiguration Video OSD AutoSelectPresentationSource: Off
In cases where you want to prevent users from easily changing the call settings from the Settings
menu, the call settings can be made available from within the Administrator Settings menu. The
administrator settings can be password protected. The OSD (On Screen Display) is where you find
the menus, dialogs, icons and indicators, and the navigation is done with a remote control.
Requires user role: ADMIN
Value space: <Off/On>
Off: The call settings will be available from within the Conference settings in the Administrator
Settings.
On: The Call Settings menu will be available from the Settings menu.
Example: xConfiguration Video OSD CallSettingsSelection: Off
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.