Cisco TelePresence SX20 Codec Reference Manual page 56

Cisco TelePresence SX20 Codec
Contents Introduction
Peripherals configuration
xConfiguration Peripherals Pairing CiscoTouchPanels RemotePairing
In order to use Cisco Touch 10 (touch controller) as user interface for the video system, Touch 10
must be paired to the video system via the network (LAN). This is referred to as remote pairing.
Remote pairing is allowed by default; you must switch this setting Off if you want to prevent remote
pairing.
Requires user role: ADMIN
Value space: <Off/On>
Off: Remote pairing of Touch 10 is not allowed.
On: Remote pairing of Touch 10 is allowed.
Example: xConfiguration Peripherals Pairing CiscoTouchPanels RemotePairing: On
xConfiguration Peripherals Profile TouchPanels
Set the number of touch panels that are expected to be connected to the video system. This
information is used by the video system's diagnostics service. If the number of connected touch
panels does not match this setting, the diagnostics service will report it as an inconsistency. Note
that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN
Value space: <NotSet/Minimum1/0/1/2/3/4/5>
NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: This number of Touch controllers should be connected to the video system.
Example: xConfiguration Peripherals Profile TouchPanels: NotSet
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration xConfiguration
Phonebook configuration
xConfiguration Phonebook Server [1..1] ID
xConfiguration Phonebook Server [1..1] Type
xConfiguration Phonebook Server [1..1] URL
56
xCommand
Enter a name for the external phone book.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: xConfiguration Phonebook Server 1 ID: ""
Select the phonebook server type.
Requires user role: ADMIN
Value space: <VCS/TMS/Callway/CUCM>
VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication
Server.
TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite
server.
Callway: Select Callway if the phonebook is to be provided by the WebEx TelePresence
subscription service (formerly called CallWay). Contact your WebEx TelePresence provider for
more information.
CUCM: Select CUCM if the phonebook is located on the Cisco Unified Communications Manager.
Example: xConfiguration Phonebook Server 1 Type: TMS
Enter the address (URL) to the external phone book server.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: xConfiguration Phonebook Server 1 URL: "http://tms.company.com/tms/public/
external/phonebook/phonebookservice.asmx"
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.