Cisco TelePresence SX20 Codec Reference Manual page 209

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Video Selfview OnMonitorRole
Identifies which monitor(s) contains the selfview, if present.
Value space of the result returned:
<First/Second/Third/Fourth>
Example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end
xStatus Video PIP ActiveSpeaker Position
Shows the position of the active speaker's image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP ActiveSpeaker Position
*s Video PIP ActiveSpeaker Position: UpperCenter
** end
xStatus Video PIP Presentation Position
Shows the position of the presentation image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP Presentation Position
*s Video PIP Presentation Position: CenterLeft
** end
xStatus Video OSD Output
Indicates which monitor is used for on-screen display output.
Value space of the result returned:
<Integer>
Example:
xStatus Video OSD Output
*s Video OSD Output: 3
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xStatus Video OSD Mode
xStatus Video OSD Style
209
xCommand
Indicates whether on-screen display is in indicator or full mode.
Indicators: The on-screen display is in passive mode when a Touch controller is paired to the
system.
Full: Full on—screen display menu is active and can be controlled with a remote control.
Value space of the result returned:
<Indicators/Full>
Example:
xStatus Video OSD Mode
*s Video OSD Mode: Full
** end
For internal use only.
Value space of the result returned:
<Classic/Default>
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.