Cisco TelePresence SX20 Codec Reference Manual page 180

Application programming interface (api)
Hide thumbs Also See for TelePresence SX20 Codec:
Table of Contents

Advertisement

Cisco TelePresence SX20 Codec
Contents
Introduction
Provisioning status
xStatus Provisioning
Shows the top level overview of the provisioning status.
xStatus Provisioning Status
Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.
Value space of the result returned:
<Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError>
Example:
xStatus Provisioning Status
*s Provisioning Status: Provisioned
** end
xStatus Provisioning Reason
Shows the cause when provisioning has failed.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Reason
*s Provisioning Reason: ""
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API
xConfiguration
xStatus Provisioning Server
xStatus Provisioning NextRetry
xStatus Provisioning Software PreviousUpgrade Changed
xStatus Provisioning Software PreviousUpgrade Status
180
xCommand
Identifies the server the system is provisioned to. This address may either be defined in the
xConfiguration ExternalManager Address setting, or provided by DHCP.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Server
*s Provisioning Server: "192.0.2.0"
** end
If provisioning has failed, returns the date and time for the next automatic provisioning attempt.
Value space of the result returned:
<String>
Example:
xStatus Provisioning NextRetry
*s Provisioning NextRetry: "2014-04-30T14:02:22Z"
** end
Shows the date and time for the previous software upgrade.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Software PreviousUpgrade Changed
*s Provisioning Software PreviousUpgrade Changed: "2014-07-06T09:32:39Z"
** end
Shows the status of the previous software upgrade.
Value space of the result returned:
<None/InProgress/Failed/InstallationFailed/Succeeded>
Example:
xStatus Provisioning Software PreviousUpgrade Status
*s Provisioning Software PreviousUpgrade Status: None
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents