Cisco TelePresence SX20 Codec Reference Manual page 203

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Video Output HDMI [1, 2] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video output HDMI.
Value space of the result returned:
<1..300>
Example:
xStatus Video Output HDMI 1 Resolution RefreshRate
*s Video Output HDMI 1 Resolution RefreshRate: 60
** end
xStatus Video Output HDMI [1, 2] Connected
Indicates whether a display is connected to the HDMI video output or not. NOTE: When a display
enters standby mode, the endpoint may not be able to detect it. The connector status will then
return False/Unknown even if the display is physically connected.
True - A display is connected to the video output connector.
False - No display is connected to the video output.
Value space of the result returned:
<True/False>
Example:
xStatus Video Output HDMI Connected
*s Video Output HDMI 1 Connected: False
** end
xStatus Video Output HDMI [1, 2] Type
Shows the connector type.
Value space of the result returned:
<HDMI/DVI/LCD/Legacy/Internal>
Example:
xStatus Video Output HDMI 1 Type
*s Video Output HDMI 1 Type: HDMI
** end
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration
xStatus Video Output DVI ConnectedDevice Name
xStatus Video Output DVI ConnectedDevice PreferredFormat
xStatus Video Output HDMI ConnectedDevice Name
203
xCommand
Shows the name of the monitor connected to the DVI port as defined in the monitors EDID.
Value space of the result returned:
<String>
Example:
xStatus Video Output DVI ConnectedDevice Name
*s Video Output DVI 2 ConnectedDevice Name: ""
*s Video Output DVI 4 ConnectedDevice Name: ""
** end
Shows the preferred input format of the monitor connected to the DVI port as defined in the
monitors EDID. This is not necessarily the format the codec is sending out.
Value space of the result returned:
<String>
Example:
xStatus Video Output DVI ConnectedDevice PreferredFormat
*s Video Output DVI 2 ConnectedDevice PreferredFormat: ""
** end
Shows the name of the monitor connected to the HDMI port as defined in the monitors EDID.
Value space of the result returned:
<String>
Example:
xStatus Video Output HDMI ConnectedDevice Name
*s Video Output HDMI 1 ConnectedDevice Name: ""
*s Video Output HDMI 3 ConnectedDevice Name: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.