Cisco TelePresence SX20 Codec Reference Manual page 66

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Standby StandbyAction
Define the camera position when going into standby mode.
Requires user role: ADMIN
Value space: <None/PrivacyPosition>
None: No action.
PrivacyPosition: Turns the camera to a sideways position for privacy.
Example: xConfiguration Standby StandbyAction: PrivacyPosition
xConfiguration Standby WakeupAction
Define the camera position when leaving standby mode.
Requires user role: ADMIN
Value space: <None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/Preset8/
Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/RestoreCameraPosition/
DefaultCameraPosition>
None: No action.
Preset1 to Preset15: When leaving standby the camera position will be set to the position defined
by the selected preset.
RestoreCameraPosition: When leaving standby the camera position will be set to the position it
had before entering standby.
DefaultCameraPosition: When leaving standby the camera position will be set to the factory default
position.
Example: xConfiguration Standby WakeupAction: RestoreCameraPosition
SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.
D14949.13
About the API xConfiguration xConfiguration
SystemUnit configuration
xConfiguration SystemUnit Name
xConfiguration SystemUnit MenuLanguage
xConfiguration SystemUnit CallLogging Mode
66
xCommand
Define the system name. The system name will be sent as the hostname in a DHCP request and
when the codec is acting as an SNMP Agent.Define the system name. The system name will be
sent as the hostname in a DHCP request and when the codec is acting as an SNMP Agent.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration SystemUnit Name: "Meeting Room"
Select the language to be used in the menus on screen, or on the Touch controller. All languages
are not supported on both user interfaces. The default language is English.
Requires user role: USER
Value space: <English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/Dutch/Finnish/
French/German/Hungarian/Italian/Japanese/Korean/Norwegian/Polish/PortugueseBrazilian/Russian/
Spanish/Swedish/Turkish/Arabic/Hebrew>
Example: xConfiguration SystemUnit MenuLanguage: English
Set the call logging mode for calls that are received or placed by the system. The call logs may then
be viewed via the web interface or using the xCommand CallHistory Get command.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable logging.
On: Enable logging.
Example: xConfiguration SystemUnit CallLogging Mode: On
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.