Wavetek ANT-20 Operating Manual page 125

ANT-20/ANT-20E
Scan start/stop O-13
Scan type O-11, O-12
SECB A-18
SEL (address type) O-24
Select channel O-33, A-10
Selection (virtual channel type)
Self call O-25, O-31
Set default O-36
Set maximum O-36
Shape to contract O-36
Signal Structure O-1, O-7, O-11, O-16, O-21, A-1,
A-4, A-6
Signaling O-10, O-16, A-7
Signaling (specifications)
Signaling Analysis O-7, O-10, A-15
Signaling channel O-22
Signaling emulation I-9, O-4, O-16, O-17, O-21, A-6
Signaling events A-17
Signaling protocol O-21
Sort criterion O-12
Source parameters O-6, O-36, O-39, O-45, A-11
Starting the measurement
Stopping a measurement
Stuffing A-6
Subaddress O-24
Sustainable Cell Rate
SVCs O-25, O-38
Switched Virtual Circuit (SVC)
Switched virtual connection
Switched Virtual Connection (SVC)
Switched virtual connections
T
Test channel O-32
Test Online Control O-6, A-13
Test Setup O-4, O-26, TB-8
Test Setup - ATM Layer QoS
Test type I-9, O-2, O-4, O-25, A-9
Topology I-10, O-4, A-3
Traffic button A-2
Traffic contract O-38, O-39, O-43
Traffic Enable A-12
Traffic generator O-36
Traffic shaper O-36, A-13
Traffic source O-39, O-45
Trouble scan O-11
Tx O-34
Tx/Rx Configuration
U
UBR O-34
Unassigned cell A-6
O-33
S-12
A-2
A-2
O-43
O-10, O-16
O-40
O-31
O-21
O-32
O-17, O-19
Broadband Analyzer/Generator
Unassigned cells O-20
UNI O-13, O-20, A-6
UNI 3.0 O-22
UNI 3.1 O-22
UNI/NNI O-34, O-41
Unidirectional O-40
V
VBR - nRT O-40
VBR - RT O-40
VBR.1 O-43
VC-AIS A-19
VCI O-34, O-41, S-1, S-12
VC-RDI A-19
Virtual channel O-11, O-32, O-38, O-40
Virtual instruments (VIs)
Virtual path O-40
VP-AIS A-19
VPI O-34, O-41, S-1, S-12
VPI/VCI O-11, O-13, O-38
VP-RDI A-19
A-1
iii