Aal Analysis - Wavetek ANT-20 Operating Manual

ANT-20/ANT-20E
2.4.3

AAL analysis

Automatic detection of AAL type for all channels detected during an Activity Scan.
Maximum number of simultaneously
analyzed channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Different AAL types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AAL1, AAL3/4,
It is also possible to display the AAL type distribution graphically (pie chart). The proportion of
each AAL type is given as a percentage.
1 Undetected means that the AAL type cannot be determined (e.g. an unknown AAL type or a severely errored cell
stream).
2 Unchecked means that the AAL type for the channel in question was not tested (e.g. because analysis was termi-
nated earlier by the user).
Specifications "ATM Layer"
Broadband Analyzer/Generator
AAL5, undetected
1
2
unchecked
S-11