CT-S280
Support
model
CT-S281
CT-D151/E651
ESC = n
[Function]
Data input control
[Code]
<1B>H<3D>H<n>
[Range]
0≤n≤255
[Outline]
[The specification which is common to the model]
• Selecting equipment for which data input from the host is valid.
• Each bit of "n" indicates as follows.
• When the printer has not been selected, this printer abandons all the received data until it is selected by this
command.
[Caution]
[The specification which is common to the model]
• Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this command. (Except
DLE EOT, DLE ENQ, and DLE DC4)
[Default]
n=1
CT-S300
CT-S310
Bit
Equipment
0
Printer
1
Not defined
2
Not defined
3
Not defined
4
Not defined
5
Not defined
6
Not defined
7
Not defined
CT-S2000
CT-S4000
CT-S801/851
CT-S601/651
Value
0
Invalid
—
—
—
—
—
—
—
- 387 -
CT-S251
CT-D150/E351
CT-P29x series
CT-S310II
1
Valid
—
—
—
—
—
—
—