Ff (At Selection Of - Citizen CT-D150 Command Reference Manual

Hide thumbs Also See for CT-D150:

Table of Contents

CT-D151/E651

FF (At selection of PAGE MODE)

Printing in PAGE MODE and returning to STANDARD MODE (at the selection of PAGE MODE)

[The specification which is common to the model]

• Executes a batch printout of the data mapped in the entire print area, and then returns to STANDARD

[The specification which is common to the model]

• All mapped data is erased after printout.

• The print area set up by ESC W is initialized.

• This command does not execute a paper cut.

• After this command is executed, the beginning of the line is taken as the start position for the next print.

• This command is only effective when the PAGE MODE is selected.

• When selecting BM paper or label paper to specify the PAGE MODE, data extended to all

printing area is printed in batch. After returning to the STANDARD MODE, setting the

start position of next label is carried out.

Appendix 5.1.4 "Example of Using PAGE MODE"

CT-D150/E351

CT-P29x series

Show Quick Links

Table of Contents