Citizen CT-D150 Command Reference Manual page 222

CT-S280 CT-S300
Support
model
CT-S281 CT-S310
CT-D151/E651
CT-S4000
• Setting MSW 4 (a=4)
n b (Set Value)
At the selection of Black mark paper/ label paper, enables
48 (Default)
auto end-measurement.
1
At the selection of Black mark paper/ label paper, disables
49
auto end-measurement.
48 (Default) Setting the first position at power ON disabled.
2
49 Setting the first position at power ON enabled.
48 Paper heading cut disabled.
3
49 (Default) Paper heading cut enabled.
48 (Default) Uses thermal roll paper.
4
49 Uses Black mark paper/ label paper.
48 (Default) Detects paper position and black mark.
5
49 Detects paper position and inter-label distance.
Reserved
6 48 (Default)
Reserved
7 48 (Default)
48 Forcible partial cut disabled.
8 Forcible partial cut enabled (full but by command:
49 (Default)
enabled).
* Default setting of MSW4-4 depends on the model. Thermal paper is the
default of the standard model.
* MSW 4-5 is valid only for black mark/label model. If MSW4-4 is set for
thermal paper, it is invalid
* MSW4-8 is invalid when black mark/label is selected. Cut type for black
mark/label paper is only full cut.
CT-S2000 CT-S4000 CT-S251
CT-S801/851 CT-S601/651 CT-P29x series
Function
- 221 -
CT-D150/E351
CT-S310II
• Setting MSW 5 (a=5)
n b (Set Value)
48 (Default) Buzzer sound enabled.
1
49 Buzzer sound disabled.
48 (Default) Basic calculation pitch (180 dpi / 360 dpi).
2
49 Basic calculation pitch (203 dpi / 406 dpi).
48 USB mode virtual serial.
3
49 (Default) USB mode printer class.
4 48 (Default) Reserved
48 (Default) Reports the power off.
5
49 Does not report power off.
6 48 (Default) Reserved
7 48 (Default) Reserved
8 48 (Default) Reserved
Function