Dc3 N (Valid In Cbm1000-Compatible Mode) - Citizen CT-D150 Command Reference Manual

CT-S280
Support
model
CT-S281
CT-D151/E651
DC3 n
(Valid in CBM1000-Compatible Mode)
[Function] Specifies/cancels printing in red (black-based paper)
[Code] <13>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• Specifies or cancels printing in red.
• Red printing is valid on black-based thermal paper. Specifies or cancels printing in black on red-based
thermal paper.
• "n" is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
0
1
[Caution] [The specification which is common to the model]
• Valid when 2-color paper is specified by the GS ( E command.
• Valid only at the top of a line.
• This command must not be used for normal thermal paper.
• At the time of setting, conducting pulse amount is increased to change the coloring.
• In case of MSW3-7=OFF, this command is invalid.
[Default] n=0
[Sample Program]
LPRINT CHR$(&H13); CHR$(1);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H13); CHR$(0);
LPRINT "AAAAA"; CHR$(&HA);
[Print Results]
ＡＡＡＡＡ
ＡＡＡＡＡ
* When dedicated thermal paper (Black-based paper) is used.
CT-S300 CT-S2000
CT-S310 CT-S801/851
Function
black-based paper
Specifying red printing.
Canceling red printing.
Black printing
Red printing
- 89 -
CT-S4000
CT-S601/651
red-based paper
Specifying black printing.
Canceling black printing.
CT-S251 CT-D150/E351
CT-P29x series CT-S310II