Citizen CT-D150 Command Reference Manual page 212

CT-S280
Support
model
CT-S281
CT-D151/E651
CT-S281
• Setting MSW 4 (a=4)
n b (Set Value)
At the selection of Black mark/Label paper, enables auto
48 (Default)
end-measurement.
1
At the selection of Black mark/Label paper, disables auto
49
end-measurement.
48 (Default) Finding top of form at power ON disabled.
2
49 Finding top of form at power ON enabled.
48 (Default) Feed & Cut at TOF disabled.
3
49 Feed & Cut at TOF enabled.
48 (Default) Uses thermal roll paper.
4
49 Uses Black mark paper/ label paper.
48 (Default) Detects paper position and black mark.
5
49 Detects paper position and inter-label distance.
48 (Default) Paper type selection disabled
6
49 Paper type selection enabled
Label mode 1 - Auto paper type selection disabled
48 (Default)
7
49 Label mode 2 – Auto paper type selection enabled
48 Cut method is determined according to the cut command.
8 Partial cut is performed regardless of cut command. (full
49 (Default)
but by command: enabled).
*** Default setting of MSW4-4 depends on the model. Thermal paper is the
default of the standard model.
*** MSW 4-5 is valid only when black mark/label is set. If MSW4-4 is set for
thermal paper, it is invalid
*** MSW4-8 is invalid when black mark/label is selected. Cut type for black
mark/label paper is only full cut.
CT-S300 CT-S2000 CT-S4000
CT-S310 CT-S801/851 CT-S601/651
Function
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
• Setting MSW 5 (a=5)
n b (Set Value)
1 49 (Default) Reserved
2 48 (Default) Reserved
48 USB mode virtual serial.
3
49 (Default) USB mode printer class.
4 48 (Default) Reserved
5 48 (Default) Reserved
6 48 (Default) Reserved
48 (Default) If PNE is released, Error LED is automatically turned off.
7 49 Error LED is not turned off until the paper is exchanged
(printer Cover is opened) even if PNE is released.
8 48 (Default) Reserved
• Setting MSW 13 (a=13) (CT-S281BD model only）
n
b (Set Value)
48(Default)
1
49
48(Default)
2
49
48(Default)
3
49
4 48(Default)
48
5
49(Default)
6 48
49(Default)
7 48(Default)
8 48(Default)
- 211 -
Function
Function
Bluetooth security level "Low"
Bluetooth security level set by MSW13-2
Bluetooth security level "Middle"
Bluetooth security level "High"
Accept connection request from all devices
Accept connection request from paired device only
Reserved
Respond against Bluetooth device scan
Does not respond against Bluetooth device scan
Disable auto reconnection request function
Enable auto reconnection request function
Reserved
Reserved