Bar Code Commands; Gs H N - Citizen CT-D150 Command Reference Manual

Support
model
CT-D151/E651

2.2.12 Bar Code Commands

GS H n

[Function] Selecting of printing position of HRI characters
[Code] <1D>H<48>H<n>
[Range] 0≤n≤3, 48≤n≤51
[Outline] [The specification which is common to the model]
• Selecting printing position of HRI characters in printing bar codes.
• "n" means the followings.
The HRI characters refer to the bar code-turned characters so that you can read them.
[Default] n=0
[See Also] GS f,
[Sample Program]
LPRINT CHR$(&H1B);"3"; CHR$(5);
LPRINT CHR$(&H1D);"h"; CHR$(50);
LPRINT CHR$(&H1D);"H"; CHR$(0);
GOSUB BC
LPRINT CHR$(&H1D);"H"; CHR$(1);
GOSUB BC
LPRINT CHR$(&H1D);"H"; CHR$(2);
GOSUB BC
LPRINT CHR$(&H1D);"H"; CHR$(3);
GOSUB BC
END
BC:
LPRINT CHR$(&H1D);"k";
LPRINT CHR$(4);
LPRINT "12"; CHR$(0);
LPRINT CHR$(&HA);
RETURN
CT-S280 CT-S300
CT-S281 CT-S310
n Printing Position
0, 48
No printing
1, 49
Above the bar code
2, 50
Below the bar code
3, 51
Both above and below the bar code
GS k
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
[Print Results]
＊ 1 2 ＊
＊ 1 2 ＊
＊ 1 2 ＊
＊ 1 2 ＊
- 154 -
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
No HRI characters
Printed above
Printed below
Printed above and below