Citizen CT-D150 Command Reference Manual page 382

CT-S280
Support
model
CT-S281
CT-D151/E651
[Outline] [The specification which is common to the model]
CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D151/CT-E651
• Gray Scale raser graphics is printed.
• Size specifies the number of bytes after height1.
• After amassing data of the amassing number of lines specified by height, printing is started.
• Prints the Image data of d1...dk as large as xL times horizontally/yL times vertically.
• xpixel specifies the number of picture Horizontal dots, ypixel specifies the number of picture Vertical dots.
• 4 bits is assigned to 1 dot. 1st byte of image data MSB corresponds to the 1st dot of picture upper left.
• Valid only Standard mode.
• The image data of d1...dk becomes so deep that a value is large (it becomes black).
0: white
1: pale gray
:
:
14: deep gray
15: black
CT-S300 CT-S2000
CT-S310 CT-S801/851
- 381 -
CT-S4000 CT-S251
CT-S601/651 CT-P29x series
CT-D150/E351
CT-S310II