Bit Image Commands; Esc * M N1 N2 [D] K - Citizen CT-D150 Command Reference Manual

Support
model
CT-D151/E651

2.2.6 Bit Image Commands

ESC * m n1 n2 [d] k

[Function] Specifying the bit image mode
[Code] <1B>H<2A>H<m>H<n1><n2> [<d>] k
[Range] m=0, 1, 32, 33
0≤n1≤255, 0≤n2≤3
0≤d≤255
k=n1+256×n2 (m=0, 1), k=(n1+256×n2)×3 (m=32, 33)
[Outline] [The specification which is common to the model]
• According to the number of dots specified in "n1", "n2", specify the bit image of mode "m".
• The number of dots printed is divided by 256, whose quotient is taken as n2 and residual as "n1". The total
number of dots printed in the horizontal direction is equal to n1+(256×n2).
• When bit image data have been input in excess of dot positions that can be printed on one line, the excess
data are discarded.
• "d" is bit image data. Bits to be printed are specified as "1" and those not as "0".
• The bit image modes specified by "m" are shown as follows:
m
0
1
32
33
CT-S280 CT-S300
CT-S281 CT-S310
Mode
8 dot single density
8 dot double density
24 dot single density
24 dot double density
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Vertical Direction
Dot Count Dot Density
8 67dpi
8 67dpi
24 203dpi
24 203dpi
- 109 -
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
Horizontal Direction
Maximum Dot
Dot Density
Count
101dpi (1)
203dpi (2)
101dpi (3)
203dpi (4)