Citizen CT-D150 Command Reference Manual page 163

Support
model
CT-D151/E651
GS1 DataBar Omnidirectional
This bar code, consisting of numerals only, has a fixed length of 13 columns.
The minimum height of the bar is 33 times of module size..
（The module size means the minimum width of bar/space that makes up GS1 DataBar. The value is
set by GS w n command.）
No check digit is used.
GS1 DataBar Truncated
The difference from GS1 DataBar Omnidierctional is minimum size of bar height.only. The minimum
height of the bar is 13 times of module size.
The bar is suitable to print bar in slender space.
No check digit is used.
GS1 DataBar Limited
This code is the smallest symbology among GS1 DataBar symbologies and the size is minimized by
the package indicator (top digits) limited to be "0" or "1". Therefore, the first byte of the data is fixed to
"0"(48) or "1"(49).
The minimum height of the bar is 10 times of module size.
No check digit is used.
GS1 DataBar Expanded
This code covers ISO646(Upper/lower character aphanumerals, space, 20 symbols) and FNC1. Up
to 77 digits numerals or up to 41 digits alphabet can be encoded to the bar code.
But following characters are treated as special character to enter special code to the boarcode.
The minimum height of the bar is 34 times of module size.
｛ ｛
｛ (
｛ )
｛ *
｛ 1
20 symbols
[ ! " % & ' ( ) * + , - . / : ; < = > ? _ ]
CT-S280 CT-S300
CT-S281 CT-S310
"｛"
"（"、"）"
"＊"
Escape sequence
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Escape character
Application identifier
Automatic check digit embedding
Function
Character "｛" is encoded to barcode symbol.
Character "（" is encoded to barcode symbol.
Character "）" is encoded to barcode symbol.
Character "＊" is encloded to barcode symbol.
FNC1 is encoded to barcode symbol.
- 162 -
CT-S251 CT-D150/E351
CT-P29x series CT-S310II