Kanji Control Commands; Fs ! N - Citizen CT-D150 Command Reference Manual

Support
model
CT-D151/E651

2.2.14 Kanji Control Commands

FS ! n

[Function] Collectively setting Kanji print mode
[Code] <1C>H<21>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• Collectively sets Kanji print mode.
• Each bit of "n" has the following meaning:
[Caution] [The specification which is common to the model]
• Setting both double-height and double-width enlargement causes four times enlargement.
• Underline is applied to all width of printed characters but not to the part skipped by HT. Underline is not applied
to the character rotated by 90° clockwise.
• Thickness of underline is the value set by FS – (defaulted to 1 dot width).
[Default] n=0
[See Also] FS -,
CT-S280 CT-S300
CT-S281 CT-S310
Bit Function
0 Undefined
1 Undefined
2 Double-width enlargement
3 Double-height enlargement
4 Undefined
5 Undefined
6 Undefined
7 Underline
FS W, GS !
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Value
0
-
-
Canceled
Canceled
-
-
-
Canceled
- 182 -
CT-S251 CT-D150/E351
CT-P29x series CT-S310II
1
-
-
Specified
Specified
-
-
-
Specified